Industrial Valves
Supplier in Qatar
Valiol Trading supplies the complete range of certified industrial valves to QatarEnergy contractors, Ras Laffan operators, North Field EPC projects, and offshore Qatar installations — gate valves, ball valves, globe valves, check valves, butterfly valves, safety relief valves, control valves, and needle valves — all with full API/ASME certification, EN 10204 3.1 MTC, and same-week Doha delivery.
Certified Industrial Valves & Flow Control
Supplier — Doha, Qatar
Valiol Trading is a certified industrial valves supplier headquartered in Doha, Qatar. We supply the complete range of industrial valves — from cast and forged steel gate valves and trunnion-mounted ball valves to control valves, safety relief valves, and automated actuated valve assemblies — all with full API and ASME certification and EN 10204 3.1 material test documentation for QatarEnergy EPC contractor requirements.
Our valve range serves Qatar's oil & gas upstream, midstream, and downstream operations, EPC contractors, refineries, petrochemical plants, power generation, water desalination, and Qatar offshore and subsea facilities — backed by a Doha-based technical team that understands Qatar project specifications inside and out.
- Gate, ball, globe, check, butterfly, control, needle, safety & plug valves in Qatar stock
- Sizes NPS ½″ to 60″ — flanged, butt weld, socket weld & threaded end connections
- Pressure ratings: Class 150 to 2500# and API 6A wellhead ratings to 15,000 PSI WP
- Carbon steel, stainless steel, duplex, alloy steel, and nickel alloy body options
- Manual, gear-operated, pneumatic, electric & hydraulic actuator options
- QatarEnergy EPC AVL / vendor pre-qualification documentation support
International Valve Standards
Industrial Valve Types for Qatar Projects
From simple manual gate valves to complex actuated control valve assemblies — Valiol Trading stocks and sources every valve type required for Qatar's oil & gas, petrochemical, power, and infrastructure projects.
Gate Valves
Full-bore isolation valves for on/off service in Qatar pipelines and process plants. Available in cast steel (API 600), forged compact (API 602), and pipeline designs (API 6D). Rising OS&Y stem. Bolted bonnet and pressure seal bonnet options.
Ball Valves
Quarter-turn valves for fast, reliable isolation on Qatar pipelines. Floating ball for small bore general service. Trunnion-mounted for large diameter and high pressure — including double block & bleed (DBB) for Qatar injection and metering points.
Globe Valves
Precision flow throttling and regulation for Qatar process plants. T-pattern, angle, and Y-pattern configurations. Forged (API 602) for small-bore HP and cast (ASME B16.34) for larger bore. Ideal for steam, injection, and flow control service.
Check Valves
Non-return valves preventing backflow in Qatar pipeline and process systems. Swing check, dual-plate (wafer), piston/lift check, ball check, and non-slam axial flow designs — selected based on Qatar service fluid, velocity, and pressure.
Butterfly Valves
Lightweight quarter-turn valves for large-diameter Qatar cooling water, seawater, fire protection, and HVAC systems. Concentric rubber-seated, double-eccentric HP, and triple-eccentric metal-seated designs. Wafer, lug, and double-flanged body types.
Needle Valves
Fine-adjustment flow control for Qatar instrument, sampling, and small-bore HP service. Stainless steel, alloy, and Monel available. Straight, angle, and cross-over patterns for instrument manifolds and gauge isolation on Qatar oil & gas sites.
Safety & Relief Valves
Overpressure protection for Qatar process vessels, piping systems, and pressure equipment. API 526 flanged safety relief valves (SRVs), and API 520 sizing-compliant relief valves. Set pressure to order for Qatar plant pressure design requirements.
Control Valves
Automated flow control valves for precise process regulation in Qatar refineries and petrochemical plants. Globe, rotary, and cage-guided designs. Single-seated, double-seated, and high-pressure drop service. Complete with actuator and HART/Fieldbus positioner.
Plug Valves & Specialty
Lubricated and non-lubricated plug valves for Qatar natural gas, LPG, and corrosive service. Also: diaphragm valves, pressure reducing valves (PRVs), solenoid valves, and knife gate valves for slurry and utilities on Qatar project sites.
Valve Operation Types — Qatar Piping Reference
Gate Valve
Linear sliding wedge — full-bore isolation. On/off only. API 600 / API 6D.
Ball Valve
Quarter-turn sphere — fast on/off. Trunnion or floating. API 6D.
Globe Valve
Plug & seat — precise throttling. API 602 / ASME B16.34.
Check Valve
Non-return — prevents backflow. Swing / dual plate. API 594 / API 6D.
Butterfly Valve
Disc rotation — large-bore, lightweight. API 609. Wafer / lug / flanged.
Complete Valve Specifications — Qatar Stock
Detailed specification tables for all valve types supplied by Valiol Trading. All available with full API monogram, manufacturer test certificates, and EN 10204 3.1 MTC for Qatar EPC contractor requirements. Contact our Doha team for pricing and lead times.
Gate Valves — Cast & Forged Steel
Gate valves are the primary isolation valve for Qatar oil & gas pipelines, refineries, and process plants. Valiol Trading supplies bolted-bonnet cast steel gate valves (API 600), compact forged gate valves (API 602), and pipeline gate valves (API 6D) — all in Qatar-deliverable timeframes.
| Type / Standard | Size Range (NPS) | Pressure Class | Body Material | Stem Type | End Connection | Bonnet | Qatar Application |
|---|---|---|---|---|---|---|---|
| API 600 Bolted Bonnet Cast Gate Valve | 2″ – 72″ | 150# / 300# / 600# / 900# / 1500# / 2500# | A216 WCB, A217 WC6/WC9, CF8M | OS&Y Rising Stem | RF, RTJ, BW | Bolted Bonnet | Qatar refineries, Ras Laffan process plants, pipelines |
| API 602 Forged Compact Gate Valve | ½″ – 4″ | 800# / 1500# / 2500# | A105N, A182 F316, F11, F22 | OS&Y / NRS Rising Stem | SW, THD, BW, Flanged | Bolted Bonnet | Qatar instrument manifolds, HP process piping |
| API 6D Slab Gate / Through-Conduit | 2″ – 60″ | 150# / 300# / 600# / 900# / 1500# / 2500# | A216 WCB, A351 CF8M, A352 LCC | OS&Y Rising Stem | RF, RTJ, BW, R/E | Bolted & Pressure Seal | Qatar mainline pipeline isolation, pig traps, North Field |
| API 600 Pressure Seal Bonnet Gate Valve | 2″ – 24″ | 900# / 1500# / 2500# | A216 WCB, A217 WC6/WC9, CF8M | OS&Y Rising Stem | RF, RTJ, BW | Pressure Seal | Qatar HP steam, high-pressure refinery process |
| NACE MR0175 Sour Service Gate Valve | 1″ – 24″ | 150# / 300# / 600# / 900# | A216 WCB (NACE), LCC, LCB | OS&Y, HIC/SSC resistant | RF, RTJ, BW | Bolted Bonnet | Qatar H₂S sour service, North Field, acid gas systems |
| API 600 Parallel Slide Gate Valve | 2″ – 36″ | 150# / 300# / 600# | A216 WCB, CF8M | OS&Y Rising Stem | RF, RTJ | Bolted Bonnet | Qatar steam service, Ras Laffan power generation |
Ball Valves — Floating & Trunnion Mounted
Ball valves are the dominant valve type in Qatar oil & gas projects due to their low operating torque, tight shut-off, and suitability for automation. Valiol Trading supplies floating ball valves for smaller sizes and trunnion-mounted for large-diameter and high-pressure Qatar pipeline and process applications.
| Type / Standard | Design | Size Range (NPS) | Pressure Class | Body Material | Bore | End Connection | Qatar Application |
|---|---|---|---|---|---|---|---|
| API 6D Trunnion Ball Valve | Trunnion Mounted, Top / Side Entry | 2″ – 60″ | 150# / 300# / 600# / 900# / 1500# / 2500# | A216 WCB, A351 CF8M, A352 LCC | Full Bore (FB) / Reduced Bore (RB) | RF, RTJ, BW, R/E | Qatar pipeline isolation, pig launching, DBB service |
| API 608 Floating Ball Valve | Floating Ball, 2-Piece / 3-Piece | ½″ – 8″ | 150# / 300# / 600# / 800# | A105N, A216 WCB, CF8M, A182 F316 | Full Bore / Reduced Bore | RF, SW, THD, BW | Qatar general service, instrumentation, utility |
| API 6D DBB — Double Block & Bleed | Trunnion, Independent Seats, Bleed Port | 2″ – 36″ | 150# / 300# / 600# / 900# / 1500# | A216 WCB, A351 CF8M, LCC | Full Bore | RF, RTJ, BW | Qatar injection points, positive isolation, metering |
| API 6D Subsea Ball Valve | Trunnion, ROV Operable / Spring Return | 2″ – 24″ | Class 600 – 2500# | A182 F316L, Duplex S31803, Inconel 625 | Full Bore | BW, Hub, Flange | Qatar offshore subsea pipelines, manifolds |
| NACE MR0175 Sour Service Ball Valve | Trunnion / Floating, Hardened Trim | ½″ – 36″ | 150# / 300# / 600# / 900# | A216 WCB (NACE), LCC, A182 F316 | Full / Reduced Bore | RF, RTJ, BW | Qatar H₂S sour service, North Field wet gas |
| API 6A Wellhead Ball Valve | Trunnion, Fire-Safe, Anti-Static | 1″ – 20″ | 2,000 / 5,000 / 10,000 / 15,000 PSI WP | A182 F22, F316, Inconel 718 | Full Bore | Flanged 6B / 6BX | Qatar wellheads, Xmas trees, manifolds |
Globe Valves
Globe valves are specified when accurate flow throttling, regulation, or frequent opening and closing is required in Qatar process plants — as opposed to simple on/off gate or ball valves. Available in T-pattern, Y-pattern, and angle configurations, forged and cast.
| Type / Standard | Pattern | Size Range (NPS) | Pressure Class | Body Material | Stem Type | End Connection | Qatar Application |
|---|---|---|---|---|---|---|---|
| API 602 Forged Globe Valve | T-Pattern | ½″ – 4″ | 800# / 1500# / 2500# | A105N, A182 F316, F11, F22, F51 | OS&Y Rising Stem | SW, THD, BW, RF | Qatar HP process, instrumentation, chemical injection |
| ASME B16.34 Cast Globe Valve | T-Pattern / Y-Pattern | ½″ – 24″ | 150# / 300# / 600# / 900# / 1500# / 2500# | A216 WCB, A217 WC6/WC9, CF8M | OS&Y Rising Stem | RF, RTJ, BW | Qatar flow throttling, pressure drop service |
| ASME B16.34 Angle Globe Valve | Angle (90° turn) | ½″ – 16″ | 150# / 300# / 600# / 900# | A216 WCB, CF8M, A182 F316 | OS&Y Rising Stem | RF, BW | Qatar steam service, high flow velocity systems |
| ASME B16.34 Pressure Seal Globe Valve | T-Pattern | 2″ – 20″ | 900# / 1500# / 2500# | A216 WCB, A217 WC9/WC6 | OS&Y Rising Stem | RF, RTJ, BW | Qatar HP steam, Ras Laffan power plant turbine bypass |
Check Valves — Non-Return Valves
Check valves are passive devices that open under forward flow and close automatically when flow reverses — protecting Qatar pumps, compressors, and pipelines from backflow damage. Valve type selection depends on Qatar service fluid, velocity, and pressure class.
| Type | Standard | Size Range (NPS) | Pressure Class | Body Material | End Connection | Flow Direction | Qatar Application |
|---|---|---|---|---|---|---|---|
| Swing Check Valve | API 594 / API 6D | 2″ – 60″ | 150# / 300# / 600# / 900# / 1500# | A216 WCB, CF8M, A352 LCC | RF, RTJ, BW | Horizontal (preferred) | Qatar pipelines, pump discharge, compressor outlet |
| Dual Plate Check Valve (Wafer) | API 594 | 2″ – 60″ | 150# / 300# / 600# / 900# / 1500# | A216 WCB, CF8M, LCB, A352 LCC | Wafer (lug available) | H & V | Qatar compact spaces, high-flow pipelines |
| Piston (Lift) Check Valve | ASME B16.34 | ½″ – 12″ | 150# / 300# / 600# / 900# / 1500# / 2500# | A216 WCB, CF8M, A182 F316 | RF, SW, THD, BW | Horizontal only | Qatar HP process, instrument air, chemical injection |
| Ball Check Valve | API 602 / ASME B16.34 | ½″ – 4″ | 800# / 1500# / 2500# | A105N, A182 F316, Duplex | SW, THD, RF | H & V | Qatar chemical injection, small-bore HP service |
| Non-Slam Check Valve (Axial Flow) | API 6D | 2″ – 36″ | 150# / 300# / 600# / 900# | A216 WCB, CF8M, LCC | RF, RTJ, BW | H & V | Qatar compressor protection, anti-surge service |
Butterfly Valves
Butterfly valves are the preferred choice for large-diameter, low-pressure isolation in Qatar cooling water, seawater, fire protection, and HVAC systems where space and weight savings are important compared to gate valves of equivalent size.
| Type | Standard | Size Range (NPS) | Pressure Class | Disc / Seat Material | Body Connection | Actuation | Qatar Application |
|---|---|---|---|---|---|---|---|
| Concentric BFV — Rubber Seated | API 609 Cat A | 2″ – 96″ | Class 150 | Ductile iron disc / EPDM seat | Wafer / Lug | Manual, Gear, Pneumatic, Electric | Qatar water, sewage, HVAC, fire protection |
| Double-Eccentric HP Butterfly Valve | API 609 Cat B | 3″ – 72″ | 150# / 300# / 600# | SS 316 disc / PTFE or metal seat | Wafer / Lug / Double Flanged | Manual, Gear, Pneumatic, Electric | Qatar oil & gas, chemical, power gen, seawater |
| Triple-Eccentric Metal-Seated BFV | API 609 / ASME B16.34 | 3″ – 72″ | 150# / 300# / 600# / 900# | SS 316 / Duplex / Alloy metal seat | Double Flanged / Wafer | Manual, Gear, Pneumatic, Electric, Hydraulic | Qatar high-temp, cryogenic LNG, fire-safe service |
| PTFE/PFA Lined Butterfly Valve | ASME B16.34 | 1″ – 24″ | Class 150 | SS 316 disc / PTFE-lined body | Wafer / Lug | Manual, Pneumatic, Electric | Qatar corrosive chemicals, Mesaieed acid service |
Safety, Control, Needle, Plug & Specialty Valves
Beyond the core isolation valve range, Valiol Trading supplies specialised valve types for specific Qatar process, safety, and instrumentation applications.
| Valve Type | Standard | Size Range | Pressure Rating | Body Material | Primary Function | Qatar Application |
|---|---|---|---|---|---|---|
| Safety Relief Valve (SRV / PSV) | API 526 / API 520 | 1″×2″ — 8″×10″ | Set pressure to order; up to 6,000 PSI | A216 WCB, CF8M, A182 F316 | Automatic overpressure relief | Qatar pressure vessels, boilers, Ras Laffan piping |
| Pressure Reducing Valve (PRV) | ASME B16.34 | ½″ – 8″ | Up to Class 900# | A216 WCB, CF8M, Brass | Reduce downstream pressure to set point | Qatar steam systems, utilities, gas distribution |
| Globe Control Valve (Actuated) | ANSI/FCI 70-2 / IEC 60534 | ½″ – 24″ | 150# / 300# / 600# / 900# / 1500# | A216 WCB, CF8M, A217 WC6 | Precise flow / pressure modulation | Qatar DCS process control, Ras Laffan flow regulation |
| Needle Valve | ASME B16.34 | ¼″ – 2″ | 800# / 1500# / 3000# / 6000# | SS 316, A105N, Monel, Duplex | Fine flow adjustment / instrument isolation | Qatar gauge isolation, sample points, HP instruments |
| Lubricated Plug Valve | API 6D / API 599 | 1″ – 24″ | 150# / 300# / 600# / 900# | A216 WCB, CF8M, Ni-Resist | Quarter-turn isolation with lubricant seal | Qatar natural gas, LPG, abrasive and corrosive service |
| Knife Gate Valve | MSS SP-81 | 2″ – 60″ | Class 150 | Cast iron, SS 316, Duplex | Isolation for slurry, thick fluids | Qatar wastewater, cooling water, slurry service |
| Solenoid Valve | IEC 60947 | ¼″ – 4″ | Up to 250 bar | SS 316, Brass, Nylon | Electrically actuated on/off control | Qatar instrumentation, automated systems, utilities |
| Diaphragm Valve | ISO 16138 | ½″ – 12″ | Up to PN 25 | CS, SS 316, CPVC, PP, PVDF | Isolation in corrosive & hygienic service | Qatar pharma, food, chemical, water treatment |
Valve Trim Designation — API 600 Reference
Valve trim refers to internal wetted parts — disc/wedge, seat rings, stem, and backseat bushing. Correct trim selection is critical for Qatar service compatibility — especially for sour gas, seawater, and high-temperature refinery service.
| Trim No. | Seating Surface Material | Stem Material | Backseat / Guide | Qatar Application |
|---|---|---|---|---|
| Trim 1 | 410 Stainless Steel | 410 SS | 410 SS | General Qatar service, moderate temperatures |
| Trim 5 | Monel (Ni-Cu alloy) | Monel | Monel | Qatar seawater, HF acid, corrosive media |
| Trim 8 | 316 Stainless Steel | 316 SS | 316 SS | Qatar general corrosion-resistant service |
| Trim 9 | Alloy 20 (CN7M) | Alloy 20 | Alloy 20 | Qatar sulphuric acid, corrosive chemicals |
| Trim 10 | Duplex (UNS S31803) | Duplex | Duplex | Qatar offshore, seawater, North Field chloride service |
| Trim 12 | Stellite-faced seat rings | 316 SS | 316 SS | Qatar high-temp, high-velocity, abrasive Ras Laffan service |
| Trim 16 | Tungsten Carbide faced | 316 SS | 316 SS | Qatar severe erosive, abrasive service |
| Trim Inconel | Inconel 625 / 718 | Inconel | Inconel | Qatar sour service H₂S, North Field very high temperature |
Valve Pressure–Temperature Ratings — ASME B16.34 / A216 WCB (Carbon Steel)
Maximum allowable working pressure varies by class and temperature. Table below shows ASME B16.34 ratings for carbon steel Group 1.1 (A216 WCB) — the most common valve body material on Qatar oil & gas projects. Consult Valiol's technical team for stainless, alloy, or duplex ratings.
| Temperature (°C / °F) | Class 150 (bar) | Class 300 (bar) | Class 600 (bar) | Class 900 (bar) | Class 1500 (bar) | Class 2500 (bar) |
|---|---|---|---|---|---|---|
| –29 to 38°C / Ambient | 19.6 | 51.1 | 102.1 | 153.2 | 255.3 | 425.5 |
| 100°C / 212°F | 17.7 | 46.6 | 93.2 | 139.8 | 233.0 | 388.4 |
| 200°C / 392°F | 15.8 | 41.4 | 82.7 | 124.1 | 206.8 | 344.8 |
| 300°C / 572°F | 14.7 | 38.3 | 76.5 | 114.9 | 191.5 | 319.2 |
| 400°C / 752°F | 12.9 | 33.6 | 67.2 | 100.7 | 167.9 | 279.8 |
| 450°C / 842°F | 11.0 | 28.7 | 57.3 | 86.0 | 143.3 | 238.8 |
| 538°C / 1000°F | 5.1 | 13.4 | 26.8 | 40.3 | 67.1 | 111.8 |
Valve Body Material Selection Guide — Qatar Service
Selecting the correct valve body and trim material is critical to performance and service life in Qatar's demanding environments. This guide covers the most-specified valve body grades for Qatar EPC, operator, and offshore projects.
Carbon Steel — A216 WCB / A105
The standard choice for most Qatar oil & gas, Ras Laffan refinery, and process applications at –29°C to +425°C. Cost-effective, widely available from Doha stock, and strong. The default body material for Class 150–2500 valves on Qatar EPC projects.
Low-Temp Carbon Steel — A352 LCC / A350 LF2
Impact-tested carbon steel for service down to –46°C. Used in Qatar North Field LNG trains, refrigeration, and low-temperature gas processing where standard WCB would become brittle. Mandatory for Qatar cryogenic process valves.
Stainless Steel — CF8M / A182 F316
Excellent corrosion resistance for Qatar offshore piping, seawater systems, chemical service, and food & pharma. Service range –196°C to +538°C. The standard SS valve body for Qatar Ras Laffan petrochemical and offshore installations.
Chrome-Moly Alloy Steel — WC6 / WC9 / C5
A217 WC6 (1.25Cr-0.5Mo) and WC9 (2.25Cr-1Mo) for elevated temperature service up to +593°C in Qatar power generation, HP steam, and Ras Laffan refinery high-temperature circuits. Mandatory for HRSG and supercritical steam applications.
Duplex Stainless Steel — A995 4A / CD3MN
Excellent for Qatar offshore, seawater, and high-chloride environments where 316L is insufficient. PREN >35 — twice the strength of austenitic SS. Lighter valves, higher pressure ratings. Mandatory for North Field sour gas and offshore Qatar specifications.
Nickel Alloys — Inconel / Hastelloy / Monel
For extreme Qatar service conditions: Hastelloy C276 for reducing acids and oxidising media in Mesaieed; Inconel 625/718 for H₂S sour service and very high temperature North Field applications; Monel 400 for HF acid and Qatar seawater.
Valve Actuator Types for Qatar Projects
Valiol Trading supplies valves with or without actuators — complete factory-tested valve-actuator-positioner assemblies ready for installation on Qatar project sites. All actuator mounting to ISO 5211 top flange standard.
Manual Handwheel
Standard for small-bore and low-cycle Qatar valves. Rising or non-rising handwheel. No power required. Direct or geared operation. Most economical option for low-frequency on/off service on Qatar project sites.
Gear Operator
Bevel or spur gear box for large-bore manual operation on Qatar pipelines. Reduces required torque on large diameter or high-pressure valves. Standard for 10″ NPS and above on Qatar mainline valves, block valve stations, and pig launchers.
Pneumatic Actuator (Spring Return)
Air-to-open / air-to-close / spring-return (fail-safe) piston or scotch-yoke actuators for Qatar remote operation. Fast action, suitable for ATEX Zone 1/2 hazardous areas on Qatar oil & gas sites. 4–7 bar instrument air supply required.
Electric Actuator (MOV)
Motor-operated valve actuators for Qatar remote DCS control. 24V DC, 110V, 220V, or 415V AC supply options. Fail-open, fail-closed, or fail-in-place. ATEX and IECEx Zone 1/2 certified actuators available for Qatar hazardous area installations.
Hydraulic Actuator
High-force actuation for Qatar large-bore, high-pressure, or subsea valves where pneumatic force is insufficient. Linear and rotary hydraulic actuators for Qatar pipeline mainline valves and subsea manifold control systems.
Smart Positioners & Controls
HART, FOUNDATION Fieldbus, and Profibus positioners, limit switches, solenoid valve pilots, and local control panels supplied as complete factory-tested valve control assemblies for Qatar DCS-integrated process systems.
Valve Standards for Qatar Projects
Every valve supplied by Valiol Trading complies with the API, ASME, and NACE standards required by QatarEnergy, Ras Laffan operators, and Qatar EPC engineering specifications.
Cast steel gate valves for Qatar refineries & process plants. Bolted bonnet. Class 150–2500. The primary Qatar gate valve standard.
Compact forged steel gate, globe & check valves ≤4″. Class 800 / 1500 / 2500. Qatar HP instrument & small-bore process.
Pipeline valves — gate, ball, plug & check. The dominant Qatar transmission pipeline valve standard. North Field & Ras Laffan.
Wellhead & Christmas Tree equipment. Valves to 15,000 PSI WP. Qatar upstream oil & gas wellhead applications.
Check valves — wafer, lug, and double-flanged. Swing check & dual-plate check valves for Qatar pipelines.
Butterfly valves — lug and wafer type. Category A (rubber) and B (PTFE/metal seated). Qatar cooling water & process.
Flanged steel pressure relief valves. Spring-loaded PSVs for Qatar process vessels, 1″×2″ to 8″×10″ inlet.
Steel valves — flanged, threaded & BW ends. The primary dimensional & pressure rating standard for all Qatar industrial valves.
Face-to-face & end-to-end dimensions. Ensures interchangeability between valve manufacturers on Qatar projects.
Valve inspection & testing — shell, seat & backseat tests. Supplied on all Qatar valve orders as standard.
Materials for H₂S sour environments. Mandatory for Qatar North Field, offshore & acid gas valve applications.
Fugitive emissions testing — low-emission packing for Qatar HSSE compliance and environmental requirements.
Industries & Applications Across Qatar
Valiol Trading supplies certified industrial valves to every major sector of Qatar's energy and industrial economy — with full API/ASME certification and same-week Doha delivery.
Qatar Oil & Gas — Upstream
API 6A wellhead gate valves, API 6D slab gate and ball valves for Qatar gathering networks, wellhead manifolds, separator vessels, and production headers across QatarEnergy fields.
Ras Laffan Refineries
API 600 cast steel gate valves, globe valves, and API 602 forged valves for Qatar crude distillation, vacuum distillation, hydrotreaters, reformers, and all Ras Laffan process piping systems.
Qatar Midstream — Pipelines
API 6D full-bore trunnion ball valves and through-conduit gate valves for Qatar mainline pipeline isolation, North Field block valve stations, and pig traps across all Qatar gas transmission lines.
Qatar Power Generation
ASME B16.34 gate and globe valves in alloy steel (WC6/WC9) for Qatar HP steam, boiler feed, and turbine bypass service in Ras Laffan power stations and KAHRAMAA combined-cycle desalination plants.
Qatar Desalination & Water
Butterfly valves, gate valves, and PTFE-lined valves for Qatar seawater intake, reverse osmosis (RO) systems, MSF/MED desalination, and Qatar water injection service into producing reservoirs.
Qatar Petrochemical & Chemical
SS 316, duplex, and nickel alloy valves for Qatar Mesaieed Industrial Area aggressive chemical service — chlorinated solvents, acids, caustics, and high-temperature corrosive process media.
Qatar Offshore & Subsea
Subsea gate and ball valves in super duplex or Inconel for ROV operation, Qatar offshore seabed manifolds, FPSO topsides, and high-pressure Qatar offshore wellheads in NACE MR0175 sour service.
Qatar LNG Trains
Low-temperature A352 LCC / A350 LF2 gate and ball valves for Qatar North Field LNG liquefaction trains at cryogenic process temperatures down to –196°C. Triple-eccentric BFVs for large-bore LNG duty.
Qatar Construction & Utilities
Gate valves, butterfly valves, and check valves for building services, Qatar fire protection systems, HVAC, gas distribution, and infrastructure projects across Doha construction programmes.
Industrial Valves
FAQ — Qatar
Key questions from Qatar procurement engineers and project managers sourcing industrial valves for QatarEnergy, Ras Laffan, and offshore Qatar projects.
Ask Our Engineers →API 600 is the standard for bolted-bonnet cast steel gate valves used in Qatar refinery and process plant service — it covers design, materials, dimensions, and testing for cast valves specified by pressure class (150# to 2500#). It is the most common gate valve standard in Qatar refineries at Ras Laffan and Mesaieed.
API 6D is the standard for pipeline valves — gate, ball, plug, and check valves — specifically for petroleum and natural gas transmission pipelines. API 6D gate valves are typically slab-gate or through-conduit types designed for mainline Qatar pipeline isolation and pigging operations. If your Qatar project is a refinery or process plant, specify API 600. If it is a North Field gas transmission pipeline or gathering system, specify API 6D.
In a floating ball valve, the ball is held in place only by the two seat rings and is free to float slightly — fluid pressure pushes the ball against the downstream seat to achieve the seal. Floating designs are used in smaller sizes (typically up to NPS 8″) and lower pressure classes for general Qatar service. They are lower cost and suitable for instrumentation, utilities, and small-bore process connections.
In a trunnion-mounted ball valve, the ball is mechanically anchored top and bottom with separate trunnion bearings — spring-loaded seats maintain contact with the ball. This design is used for large sizes (2″ and above) and higher Qatar pipeline pressures where the fluid force on a floating ball would require excessive operating torque. Trunnion valves can also incorporate double-block-and-bleed (DBB) functionality and are standard for all Qatar North Field mainline pipeline valves.
NACE MR0175 (now ISO 15156) specifies material requirements for equipment used in oil & gas environments containing hydrogen sulphide (H₂S) — commonly called "sour service". Exposure to H₂S can cause sulphide stress cracking (SSC) and hydrogen-induced cracking (HIC) in susceptible materials, leading to sudden failure even at stresses below yield strength.
NACE-compliant Qatar valves have controlled hardness levels (typically ≤22 HRC for carbon steel body, trim, and bolting), specified heat treatment, and additional impact testing. For any Qatar application involving sour gas — particularly North Field, offshore Qatar, and Ras Laffan acid gas systems — always specify NACE MR0175 / ISO 15156 compliance. Valiol Trading supplies NACE-compliant valves as standard for all Qatar sour service projects.
Yes. Valiol Trading supplies complete valve-actuator-positioner assemblies — factory assembled and tested, ready for direct installation on Qatar project sites. For pneumatic actuators (spring return / double acting), electric actuators (MOV), and hydraulic actuators, we can supply the complete assembly including the valve, actuator, solenoid valve pilot, limit switches, handwheel override, and local junction box. ATEX Zone 1 and Zone 2 certified actuators are available for Qatar hazardous area installations. HART and FOUNDATION Fieldbus smart positioners are available for Qatar DCS-integrated process systems.
Every Qatar valve order includes: API 598 manufacturer's hydrostatic and seat test certificate; EN 10204 3.1 material test certificates (MTC) for body, trim, and bolting; API monogram certificate where applicable; dimensional inspection report; surface treatment and coating record; packing and preservation certificate; and packing list with Qatar project tag numbers. On request we provide EN 10204 3.2 third-party witnessed inspection by SGS, Bureau Veritas, or Intertek; NACE MR0175 compliance certificates; fire-safe test certificates (API 607 / BS 6755); and fugitive emissions (API 624 / ISO 15848-1) certification — all to QatarEnergy EPC contractor documentation requirements.
Yes. Valiol Trading sources valves from manufacturers who hold QatarEnergy Approved Vendor List (AVL) registrations — including API-licensed manufacturers from Europe, India, South Korea, and the USA. For Qatar EPC projects that require specific AVL-approved brands, please provide your QatarEnergy EPC contractor approved vendors list and we will confirm which brands we can supply, lead times, and documentation package. We also provide AVL pre-qualification support, helping Qatar contractors submit technical dossiers and PQ questionnaires to QatarEnergy and its operating subsidiaries.
Fire-safe certification (API 607 for quarter-turn valves; BS 6755 Part 2 for gate and globe valves) verifies that in the event of a fire — which can destroy polymer seats in standard ball or butterfly valves — the valve will maintain a secondary metal-to-metal seal that prevents catastrophic release of flammable or toxic fluids. Fire-safe tested and certified valves are mandatory on Qatar oil & gas sites, FPSO topsides, and Ras Laffan refinery hydrocarbon services wherever the consequence of a fire seat failure is unacceptable. Valiol Trading supplies fire-safe certified valves with API 607 / BS 6755 test certificates as standard for all Qatar hydrocarbon service applications.
Related Products for Your Qatar Project
Carbon & Stainless Pipes
API 5L, ASTM A106, A312 — seamless & ERW. Qatar gas & oil pipeline stock. MTC 3.1.
View Pipes
Pipe Fittings Qatar
ASME B16.9 BW, B16.11 forged, socket weld & MSS SP-97 olets. Doha stock.
View Fittings
Flanges & Gaskets Qatar
ASME B16.5 / B16.47 / API 6A. Spiral wound gaskets & stud bolt sets. Same-week Doha delivery.
View Flanges
Structural Steel & Sections
I-beams, hollow sections, angles & plates. S275/S355, A36. Qatar stock & cut-to-length.
View Structural